I am thrilled to announce that The Eternity Plague has been published! Here’s the blurb:
In 2035, Dr. Janet Hogan makes a stunning discovery: infected by five species of naturally-mutated viruses, every one of earth’s nine billion inhabitants has become immortal.
Or have they? By the time Janet learns that this immortality is an illusion, it’s too late to change people’s beliefs. Some love her for creating this miracle and the coming paradise they long for. Others hate her for what they see ahead: immoral behavior without consequence, overpopulation, famine, and worse. Zealots demand that she save people’s souls, humanity, the earth… or the viruses. Or else.
Janet realizes this awful truth: no matter what she does, no matter what anyone else wants, sooner or later, billions will die and she’ll be blamed. Will she live long enough to figure a way out of this trap?
Meanwhile, the viruses are still mutating.
The paperback version is available from Amazon.com here for $12.99.
The ebook is available for $3.99 from these sources:
Smashwords, all ebook formats except for the Kindle
I’ll add links to more outlets as the book becomes available there. I expect that these will include the Apple iBook Store, Barnes & Noble (for the Nook), Kobo, Oyster Books (subscription service), and Scribd (subscription service).
This article and the next one will focus on problems that
are specific to dialogue.
Image courtesy of photostock / FreeDigitalPhotos.net
Sometimes characters addressing each other by name is a
problem, sometimes it’s not. It’s important to be able to tell the difference. Name-calling
is more likely to be a problem in fiction, memoir, and creative non-fiction
than in other kinds of non-fiction, because reportorial non-fiction generally
uses direct quotes in a non-conversational context.
When Name-Calling
Works
Let’s begin by identifying the situations where one
character calling another by name is appropriate.
One character needs to get another’s
attention, such as:
In a moment of danger: “Bob! Run!”
Alice shouted.
In a noisy or crowded location: “Alice,
over here!” Bob called.
To distinguish among a group of
characters: Carol spotted Ted in the group of teens hanging out at the end of
the pier. “Ted, what are you doing here?”
The author needs to direct the reader’s
attention to a specific individual: Ted, Bob, Alice, Eddie, and Francine were in
a crowd that was milling around at the end of the pier. Carol worked her way
through. “Ted, what are you doing here?”
To emphasize an emotional state, such
as:
Intimacy: “Francine, that’s so sweet,” Eddie
whispered.
Anger: “Eddie, you’re such an idiot!”
Francine said.
When characters are in a
superior/subordinate relationship. The stereotype here would be a military
environment but many civilian organizations and cultures also have these kinds
of relationships. For example, children may be taught to address the adults
around them by some kind of honorific (mister, miss, aunt, etc.) and their
family name.
The situation requires name-calling to
help the reader keep track of who’s speaking to whom. This is especially true
when there are three or more characters in the conversation. However, the
author can use action beats instead. Depending on the exact nature of the
conversation, these beats could be far more natural-sounding and effective than
having the characters name each other, even occasionally.
What’s important here is that the name-calling happens the
minimum number of times necessary. As long as the reader is clear about who is
being addressed, name-calling isn’t needed.
When It Doesn’t
Where authors run into trouble, though, is when the
characters keep calling each other by name unnecessarily. One example is in a
back-and-forth conversation between two characters where there’s no chance the
reader will confuse the speakers. Let’s go back to Eddie and Francine.
“Eddie,
you’re such an idiot!” Francine said.
“I am
not, Francine. I’ll have you know I’m highly educated.”
“I
don’t care that you’ve got a Ph.D., Eddie, that was still a stupid decision.”
“Now,
Francine, you know I made the best decision I could, based on the information I
had.”
“That
was the best decision you could make, Eddie?”
And so on. Let’s look at what’s wrong here.
In line 1, Francine calls Eddie an idiot. She’s using
Eddie’s name to emphasize that he’s the target of her anger. This might not be needed
if we had more context for the scene, but since we don’t we’ll call this line
acceptable.
Line 2 could also be OK since Eddie is trying to placate Francine.
But at the same time, lacking any other information, we know who he’s talking
to. The first sentence—or at least her name—could be deleted.
In line 3, there’s nothing to suggest that Francine could be
talking to anyone other than Eddie, and the level of emotion is set, so she doesn’t
need to call him by name. Even if there’s a superior/subordinate relationship
between these characters, there’s no sign that it’s in play. Maybe Francine has
a doctoral degree, too. Maybe she’s Eddie’s boss. Or his housekeeper. We don’t
know.
By lines 4 and 5, as Eddie tries to defend himself and
Francine keeps criticizing his decision, the names are just empty words, contributing
nothing to the story.
The edited version might look something like this:
“Eddie,
you’re such an idiot!” Francine said.
Eddie
stood up straighter. “I’ll have you know I’m highly educated.”
“I
don’t care that you’ve got a Ph.D. That was still a stupid decision.”
“I
made the best decision I could, based on the information I had.”
“That
was the best decision you could make?”
OK, that’s still not great dialogue—it could be tighter and use
more gestures and actions—but it’s a lot better than it was. It sounds more
like the way people talk.
That requirement for written dialogue to sound natural to
the reader’s mental ear is key here. When characters address each other by name
too much or in inappropriate situations, that guideline is violated. Writers,
especially new ones, may not realize that they’re making this mistake. This is
where you, as their reviewer, can help them improve both their story and their skills.
Questions For You
How can you determine if characters are calling each other
by name inappropriately? Try these tests.
Does one speaker already have the
attention of another?
Have the speakers already been
identified and there’s no chance for confusion among them?
Does the name-calling fail to amplify
or emphasize an emotion, point, or relationship?
Is it clear who the author wants the
reader to focus on?
Does the name-calling continue beyond
when it would end in natural speech?
Could the author use action beats or
dialogue tags instead, and to better effect?
If you come across situations like these, be sure to point them
out to the author and suggest ways they could ensure the reader knows who’s
speaking and the intent of their speech without resorting to name-calling.
How else do you, Dear Reader, identify
when characters are calling each other by name inappropriately? It’s not
name-calling to call them out in the Comments box below.
Image courtesy of photostock / FreeDigitalPhotos.net
By Ross B. Lampert
This post and the next one will focus on problems that are specific to dialog.
Sometimes characters addressing each other by name is a problem, sometimes it isn’t. It’s important to be able to tell the difference. It’s more likely to be a problem in fiction, memoir, and creative non-fiction than in other kinds of non-fiction, because reportorial non-fiction generally uses direct quotes in a non-conversational context. Name-calling can become a problem when character talk to each other.
Let’s begin by identifying the kinds of situations where one character calling another by name IS appropriate.
One character needs to get another’s attention, such as:
In a moment of danger: “Bob! Run!” Alice shouted.
In a noisy or crowded location: “Alice, over here!” Bob called.
From a group of characters: Carol spotted Dean in the group of teens hanging out at the end of the pier. “Dean, what are you doing here?”
The author needs to direct the reader’s attention to a specific individual: The teens were milling around at the end of the pier. Carol worked her way through the crowd. “Dean, what are you doing here?” she asked.
To emphasize an emotional state, such as:
Intimacy: “Francine, that’s so sweet,” Eddie whispered.
Anger: “Eddie, you’re such an idiot!” Francine said.
A situation where characters are in a superior/subordinate relationship. The stereotype here would be a military environment but many civilian cultures also have these kinds of relationships. Consider, for example, how the children in small-town Alabama address the adults in To Kill a Mockingbird.
There are a few other keys to note here. First, and perhaps most important, the name-calling happens the minimum number of times necessary, typically just once. I’ll discuss this more in a moment.
Second, the author has chosen to use dialog instead identifying the person being addressed through narrative. For example, the intimacy example above could also be written, “Eddie snuggled up to Francine. ‘That’s so sweet,’ he whispered.” In a case like this, the author may be looking for a little variety in the way the story is being told, or she wants to emphasize the relationship and the emotion of the moment by having one character address the other by name.
Third, the situation may require name-calling to help the reader keep track of who’s speaking to whom.
Where authors run into trouble, though, is when the characters keep calling each other by name when it isn’t necessary. Typically, this happens in a back-and-forth conversation between two characters where there’s no chance the reader will confuse the speakers. Let’s go back to Eddie and Francine for an example.
“Eddie, you’re such an idiot!” Francine said.
“I am not, Francine. I’ll have you know I’m highly educated.”
“I don’t care that you’ve got a Ph.D., Eddie, that was still a stupid decision.”
“Now, Francine, you know I made the best decision I could based on the information I had.”
“That was the best decision you could make, Eddie?”
And so on. Let’s look at what’s wrong here.
Line 1: Nothing. Francine is using Eddie’s name to emphasize that he’s the target of her anger. This might not be true if we had more context for the scene, but since we don’t we’ll call this line acceptable.
Line 2: Maybe nothing, since Eddie’s trying to placate Francine. But at the same time, lacking any other information, we know who he’s talking to. The first sentence could be deleted.
Line 3: Again, there’s nothing to suggest there’s anyone else Francine could be talking to and the level of emotion is set, so she doesn’t need to call him by name. Even if there’s a superior/subordinate relationship between these characters, there’s nothing to indicate that it’s in play here. Maybe Francine has a doctoral degree, too. Maybe she’s his boss. Or maybe she’s his housekeeper. We don’t know.
Lines 4 and 5: By now the names are just empty words, contributing nothing to the story.
The edited version might look something like this:
“Eddie, you’re such an idiot!” Francine said.
Eddie stood up straighter. “I’ll have you know I’m highly educated.”
“I don’t care that you’ve got a Ph.D. That was still a stupid decision.”
“I made the best decision I could based on the information I had.”
“That was the best decision you could make?”
OK, that’s still not great dialog—it could be tighter and use more gestures and actions—but it’s a lot better than it was. It sounds more like the way people talk.
To sum up, then, here are tests you can use to determine if an author’s characters are calling each other by name inappropriately:
One speaker already has the attention of another.
The speakers have already been identified and there’s no chance for confusion among them.
The name-calling does not serve to amplify or emphasize an emotion, point, or relationship.
It’s clear who the author wants the reader to be paying attention to.
The name-calling continues beyond when it would end in natural speech.
As a reviewer, when you come across a situation like this, be sure to point it out to the author and suggest ways they could ensure the reader always knows who’s speaking and the intent of their speech without resorting to name-calling.
What else do you look for when you’re looking for characters calling each other by name inappropriately?
Before we get to the specific tasks and techniques this series will cover, I want to talk about something that is central to your success as a reviewer: your mind. To an extent, this means your memory, but it also has to do with your attitude about and approach to critiquing, and your level of commitment to the task.
Memory
Image courtesy of Gualberto107 / FreeDigitalPhotos.net
It’s important that you have a good but specialized memory. You can’t let the words just flow in one eye and out the other, the way someone who’s reading for pleasure can. The words have to stop and make your acquaintance. Or, to put the focus in the right place, you have to make theirs.
It’s very helpful if you can recall specific kinds of details—about what a character did or said before, for example, or how the author described something—even if it’s been weeks or months since you last read a part of a work.
That’s not a skill everyone has. I believe some, perhaps most, who don’t can develop it, but it takes conscious attention to the requirement on your part, a determination to learn the skill.
If you’re a member of a critique group, you’re potentially in an ideal place to learn how to do this. I say “potentially” because not all groups are created equal. For your group to be the right kind of learning environment, there needs to be at least one person who already has the working memory to track the kinds of details this whole series is about, and has the ability to communicate clearly and effectively what they find, so you can learn from them.
Improving your memory for these details is an active process on your part! First, you have to read a work as closely as you can, actively trying to spot the good and bad in it yourself, then actively listen to the other reviewers, and then actively reread the piece, looking for what they found.
If you don’t currently possess this kind of memory, it can be tempting to sit back and let the other person do all the work. This is a mistake. It’s also—to be blunt—lazy.
The better you learn how to critique someone else’s work, the better you’ll be able to evaluate and edit your own. And that means, when it’s time for the group to review your work, they’ll have a better work to review.
Learning how to do this really isn’t any different from learning to read a text for its symbolism, theme, or deeper meaning—those things your high school English teacher tried to get you to write about in your term papers.
OK, maybe that’s a bad memory. Sorry! J (But you remembered it! That’s a start.)
And remember, this time, more than a mere letter grade is at stake.
The more you practice this skill, the better your powers of observation and your memory for these kinds of details will become. But trust me, you’re not going to get it by osmosis. If it’s not already a part of your skill set or you don’t have that turn of mind, it’s going to take effort on your part to achieve.
Attitude
Image courtesy of Marin / FreeDigitalPhotos.net
“Attitude” means a lot of things in this context. One meaning is having the willingness to learn new skills, like the ability to remember details within and across chapters. Another is how you treat the other writers in your group: how you respect their efforts, no matter their current level of skill; how you present your critique to them, especially regarding the parts that need improving; etc.
Those are important but I want to address two different aspects of attitude. The first is your view about how much critique you provide and when. In my own group, I have a member who will not thoroughly review a writer’s early drafts. Her rationale is that the writer will be making changes anyway, so a detailed critique isn’t necessary.
This view assumes the author already knows how to edit their own work, an assumption I have seen proven wrong time after time. Think about it: if they already knew, wouldn’t they have submitted a better work to the group?
In a situation like this, the critiquer’s role is especially important because they are—or should be—providing insights and suggestions to the author that he or she would not have had otherwise. The reviewer is teaching the writer how to write and edit.
The second attitude is “paying it forward”: giving first in order to receive later. In a moment I’ll discuss how critiquing others’ work will improve your own but here I want to emphasize how much you have to give. No matter how experienced you are—or aren’t—by doing the best you can to honestly and fairly critique a work, to try to help your fellow writer do better, you establish a relationship of trust and respect that will encourage them to do the same for you.
Commitment
Image courtesy of Gualberto107 / FreeDigitalPhotos.net
The last thing I want to discuss is the critiquer’s level of commitment. Being an effective, helpful reviewer means reading a piece much more carefully than an ordinary reader does. The fact that this series has nearly 60 articles on specific things to look for illustrates how much there is to do.
Reading a piece once and then telling the author, “Well, I liked it…,” isn’t effective or useful critique. Neither is reading the piece once and telling the author, “Well, it sucks.” Both fail because they neither tell the author why you liked or hated the piece nor how it could be made better.
It’s also important to understand that you’re no longer reading for entertainment. That means it doesn’t matter whether you like a piece or not.
Surprised? It’s true. The purpose of critique, and your role in a critique group, is to look at a piece and identify what worked, what didn’t, and why. If you happened to enjoy the piece, that’s a bonus. It’s also possible to dislike a piece but still see that it was well-written, and what made it so.
When I critique a piece, I read it twice. The first time I simply read it through without writing anything on the manuscript, just to get a sense of the story and its flow. After I’m done, I write about my overall impressions.
The second time is when I get down to the nitty-gritty, looking for the good and the not-so-good in everything from spelling and punctuation to plot, characterization, flow, pace, dialogue, and so on.
Make no mistake: this takes time. Sometimes it takes a lot of time.
But I treat this work as part of my job of continuing to learn my writer’s craft. Whenever I suggest a way to improve someone else’s work, I’m teaching myself how to find and fix the same kind of problem in my own. To me, this is time invested, not time wasted or lost. It’s part of my commitment to my craft.
In conclusion, then, a carefully tuned and focused memory, specific attitudes about critiquing, and a commitment to the task are key elements of the mind of an effective and valuable critiquer. A thorough critique benefits both the author and the person giving the critique. Do it well and you’ll be a better writer for it.
What qualities do you think a person needs to be an effective critiquer? You can add your thoughts and suggestions in the comments box below.
OK, I
admit it: saying there’s an imbalance between narrative and dialogue in a piece
of writing is like saying there’s an imbalance between the ice cream and the
banana in a banana split. For some people’s tastes, it’s not possible to have
too much ice cream. Or too much banana.
But
for most of us, there’s a sweet spot—pun fully intended—around which a little
bit more ice cream or banana, or a little bit less, would still be OK.
The
same is true of the balance between narrative and dialogue. Except that the
range is wider. Much wider.
It’s
possible to write and publish a story that has no dialogue whatsoever. I’ve
done it. James Michener, I’m told, wrote hundreds of dialogue-free pages at the
beginning of Hawaii.
The
opposite—no narrative at all—could be done too, I suppose, but not easily. At
some point, the speakers are going to have to be identified within the
conversation. After all, even one “Bob said” or “Alice said” dialogue tag is
narrative. Trying to avoid dialogue tags entirely runs the author into the name-calling
and “as you know, Bob” problems I’ll discuss in later posts.
So
what we’re really dealing with here is not a 100% of one or the other
situation, or even 50% + 1%, which is way too mathematical, anyway. It’s a much
more subjective but nevertheless real question: What is the balance between
narrative and dialogue that tells the story effectively? How can you as a
reviewer spot when the relative proportions result in a story that is not told
well?
It’s also
important to note here that this imbalance can show up almost down to the
paragraph level. There’s nothing wrong with a single paragraph being all
narrative or all dialogue, but problems can start to show up within just a few paragraphs,
far below the level of a scene.
The
central question is whether you remain engaged with the story. Does your mind
start to wander? Do you start skipping material? Do you get confused and have
to go back to reread a passage? If the answer to any of these questions is yes,
that could be a sign that the balance between narrative and dialogue is out of
whack. (It could be a sign of other problems, of course, but for now we’ll
ignore those possibilities.)
“Too Much” Narrative
Especially
in fiction, when a piece has a section that’s nothing but narrative, the author
may be info-dumping or lecturing the reader. When that happens, the pace will
drag or even come to a complete stop. Readers will skip ahead to where the
action picks up again.
Similarly,
large blocks of narrative can be signs the author is “telling” the story,
rather than “showing” it. If he describes what a character thought or felt,
rather than letting the reader experience those feelings or hear those
thoughts, he’ll do it through narrative.
These
are both examples of the dreaded “expository lump,” that carcinoma of words which,
if allowed to spread, will suck the life out of a story. When you find one,
it’s time to put on your best Lady Macbeth and with a cry of, “Out, damned
spot! Out, I say!” wield your reviewer’s pen.
The
key, again, is engagement: if a piece is filled with page after page of nothing
but narrative but you can’t put it down, it’s working, and imbalance is not an
issue.
“Too Much” Dialogue
Too
much dialogue reveals itself in some ways that are similar and some that are
different.
Dialogue
can be an expository lump in disguise. In this case, a character does the lecturing
instead of the author or narrator, by either making a long speech to another
character or ruminating in interior monologue.
“Long”
can be subjective, by the way. Just a few lines can feel long if they make the
reader lose interest. On the other hand, if the reader has forgotten that she’s
reading and is totally engrossed in the story, it won’t matter if a paragraph
is more than a page long.
Dialogue
can also get out of balance if the contents of the conversation are boring. Dialogue
can be boring if:
it fails to move
the story forward,
its relevance is
not clear,
it deals with
insignificant matters,
the characters
are just exchanging information, or
the characters
show no emotion or interest in what they’re discussing.
The
common thread here is the lack of conflict. Effective dialogue has a spark, an
energy that keeps the reader intensely inside the scene.
Dialogue-as-info-dump
suffers from a similar problem but in this case there’s no opportunity for
conflict because the speaker just won’t shut up.
Another
way dialogue can be out of balance is if the author is using it, intentionally
or otherwise, to avoid providing the kinds of details that narrative provides
best. There are times when just a brief bit of narrative—describing a gesture
that reveals a contradictory emotion, for example—can show what dialogue alone
cannot, or cannot show well.
Relevant
setting details are another example of good use of narrative rather than dialogue.
If an author tries to have a character describe something verbally, it will likely
sound stilted and awkward. She’s using the wrong tool for the job.
Finally,
dialogue gets out of balance when the reader loses track of who’s speaking. Even
if two characters are speaking with highly distinctive voices, after a while a
reader needs a cue in the form of a dialogue tag to keep him on track. This is especially
true when there are more than two characters in the scene.
Dialogue’s
different and shorter sentence structure results in space on the page with no printing
on it. This “white space” lets the reader rest a bit. Narrative can provide
something similar. Small insertions of narrative—the dialogue tag, the
descriptive detail—or just a one-line paragraph, also provide a restful break,
however brief, that keeps the reader engaged.
Questions For You
How
can you tell if a piece’s narrative and dialogue are getting out of balance? Ask
yourself these questions.
Is the author lecturing
or info-dumping, in either dialogue or narrative?
Is the author
providing too much detail, too little, or via the wrong method?
Is the author
telling what should be shown, or showing what should be told?
Are the
characters discussing things that make the story drag or otherwise make you lose
interest?
Is the author
failing to mix the dialogue and narrative in ways that allow you to rest, even
while you stay interested?
Does the author
let you lose track of who’s speaking?
If you
find any of these situations, be sure to let the author know and suggest
alternatives.
What
signals you that a piece’s narrative and dialogue are out of balance? I’m sure
you’ll find the right balance when you put your suggestions in the comments box
below.
Contradictions are the stuff of conflict. Contradictions
between
Image courtesy of David Castillo Dominici / FreeDigitalPhotos.net
characters’ words and actions,
what characters say to different people and/or
at different times,
what characters do at different times or in
different circumstances, or
the responses of different characters to the
same stimulus
all increase a reader’s tension
and interest in the story.
At least so long as the contradictions are intentional on
the author’s part.
If they’re not, that could be a problem. Or an unintended or
unexpected opportunity. Your job as a reviewer is to not only spot the
contradictions, but to evaluate them for effect, motivation, and intent.
Intentional or Unintentional
The first thing you need to assess is whether the author
placed a contradiction in the story intentionally or not. If you’re new to the
story or author, this can be difficult, at least until you have a better
understanding of the story and the way the author works. But even before that,
you can ask yourself whether the contradiction seems to have a purpose. Writers
should always put contradictory actions or statements into a piece for a
specific reason. They can:
indicate a change in the character’s situation,
beliefs, or intentions;
be an attempt to deceive or mislead another
character;
show confusion on the part of the character,
perhaps due to a declining mental state, being overwhelmed by their situation
or how much information is coming their way, or the conflicting demands of
other characters or the situation in the story; or
simply be an unintentional (on the character’s
part) misstatement or mistaken action that is going to have consequences later.
Your job is to assess whether the author intended to insert
that contradiction or he just made a mistake. The author’s “failure” could be
intentional: he might be withholding
information to increase your tension and your need to know what happens next.
That’s why it’s important to keep reading, as much as possible, to see if that
was, in fact, the author’s intent. If you critique what appears to be a mistake
too soon, you might have to go back and delete or revise that comment.
Assessing Contradictions
OK, so how do you assess a contradiction? It’s relatively easy
when the contrary words or acts are close together. Unfortunately, that doesn’t
always happen. That’s when this kind of assessment can be difficult, especially
if you’re not reading an entire piece at once.
Here’s an example. Let’s say that in chapter three Bob says
he respects Alice. He’s impressed with her knowledge and determination. Now
supposed Bob and Alice go their separate ways in chapters four to six, but in
chapter seven, Bob calls Alice lazy and stupid. That’s a pretty sharp contrast,
and if it seems to come out of the blue, you’re likely to remember Bob’s
earlier statements and wonder what’s up now. But if Bob’s later comment is
diffident, that Alice’s work is okay, will you catch the conflict? You should,
but it’s harder to do.
In my article on the reviewer’s mind, I discuss how to
remember details across large parts of a text or over long periods of time. You
might want to review that article soon.
Let’s say you’ve spotted some kind of contradiction. What’s
next?
Effects
The first thing to look for is its effect: how it affects
the characters involved.
Does it create new and interesting problems for
one or more characters?
Does it make matters worse for them?
Do those problems change the direction of the
story, especially in interesting and/or unexpected ways? And does the author
follow up on that new direction?
Contradictory behavior in a character reveals something
about her. This is good. Or at least, it can be.
Preparation
Next, you want to assess whether the author prepared the
reader for the contradiction. It’s important for the author to have set up the
behavior before it happens. This is a place where a lot of writers fall down.
The author can set up the contradiction in a number of ways,
and any of them can be blatant or subtle. For example:
Circumstances in the character’s life and
environment can force a change that leads to the contradiction. Being forced
out of his home by a natural catastrophe is a blatant set-up. A slow build-up
of conflict leading to a divorce or separation from his partner could be
subtle.
The character herself might have been evolving
due to an accumulation of small changes.
What the character said or did originally may
have been dishonest, misleading, or just incorrect. Or what he’s saying or
doing now may be.
The character is responding to what another
character says or does that she didn’t expect.
The character’s statement or action is
unintentional, compared to what he’s said and done before.
Motivation
A third factor is the character’s motivation for saying or
doing something that contradicts what he said or did in the past, even if that
past was just seconds ago in story time. You’ll want to assess not only if the
reader can see or sense what the motivation is but also if it’s credible, given
what you know about the story and the characters.
If the author set up the contradiction, and the character’s
motivation for it and its effect are clear, that’s great. But if she’s missed
on any one, that’s a sign there’s a problem. You as the reviewer need to
identify what went wrong.
Questions for You
Here are some questions you can ask when you’re evaluating
something that a character in a piece has done or said that seems to contradict
his earlier statements or behavior.
Did the author place this contradiction with a
purpose?
Does it reveal something about a change in the
character or her situation?
Might it be setting up something that will
happen later in the story?
If not, what exactly is the problem and how can
the author fix it?
Does this contradictory statement or behavior
change things for the character, those around him, or the overall story?
Especially, does it make things worse?
If the change doesn’t happen right away, do it
and its effects show up at all, or did the author seem to forget that she set
up a change that hasn’t happened?
If the change hasn’t shown up, why?
Was the reader prepared for the contradiction?
If he was, was that good, or was it perhaps
telegraphed (he could see it coming)?
If he wasn’t, was that good? Does it create new
interest and tension in the reader?
Can you see why the character said or did the
contradictory thing? Was her motivation clear?
If not, why not? Was that intentional on the
author’s part?
Well-placed contradictions make stories more interesting and
keep the reader engaged. Be sure to compliment the author when they do them
well.
What do you look for
and what do you consider when you run across a contradiction in a story? It’s
no contradiction to say that the best place for your suggestions is in the
comments box below.
Let’s get this out of the way right up front. This post is
about the “f-bomb” and various other phrases and four- through fourteen-letter
words that are generally not used in polite company: swear words, curse words,
obscenities, vulgarities, the whole lot, and the words we sometimes substitute
for them. As a matter of convenience, I’ll call everything swearing.
I know you’ve all heard the usual advice to writers and
their reviewers: if swear words are natural parts of a character’s way of
speaking, don’t be shy about using them, even if that’s not the way you speak.
But that’s not really enough advice for a writer, nor is it
enough for a critiquer trying to determine if such language is being used as it
should. That’s what I want to get into now.
Uses of Swearing
Writers should use swearing, like every other kind of language,
with intent. Swearing in dialog can:
Show extreme emotion;
Show a character’s response to great physical
pain[1] or a sudden, often
unpleasant surprise;
Describe, reveal an attitude about, or add
emphasis to the (usually negative) description of another character, an action,
an idea, etc.; or
Add emphasis to irony or sarcasm. Note that
using even very mild epithets, like golly-gee, can do this, too, particularly
from a character who normally uses rougher terms.
Even when swearing is part of a character’s persona,
swearing at random or too much is a problem. If a character swears all the
time, it won’t take long before the reader feels like she’s being beaten over
the head with it. Once the author has established that a character swears a lot,
he doesn’t need to show every instance.
If swearing is not
part of a character’s normal persona, when they do swear, there must be a good
reason for it. I’m not referring here to a character using some mild term like,
“oh, sugar,” but using a phrase like “oh, shit,” instead of what they would
normally use. When this happens, it should reveal something about the person or
her situation that we hadn’t known before or which had changed enough to
warrant the stronger language.
Time and Place
Swearing also needs to be consistent with the time and
culture of the story. If one 17th century pirate calls another a
scurvy dog, readers will accept that. If Edna calls Millicent that at their
weekly tea, however, it’s going to make the reader wonder. Swearing always
calls attention to itself, which is why the writer needs to make sure it’s drawing
the right kind of attention.
Along those lines, some think the fine art of scatology has
lost its verve over the decades. Today’s vocabulary of swearage seems puny and
limited compared to that of 150 or 200 years ago. When was the last time you heard
someone called a lily-livered, yellow-bellied scalawag, for example? Today, different
forms of “fuck” serve as almost every part of speech except conjunctions and
most of the other obscenities and vulgarities in English have to do with sexual
or excretory functions. Not much variety or creativity there.
Trying to overcome that poverty can have its own problems,
however.
Writers sometimes make up words to take the place of current
swear words. Most often in science fiction and fantasy, they’ll do it to
introduce what they want the reader to believe are the swear words of the
story’s time or place. These words almost always fail. They stand out just
because they’re made up, rather than part of the reader’s regular vernacular.
Writers who don’t want to use real swear words in work they
expect teens and younger kids to read may make up swear words too. Unfortunately
that response to a perceived taboo has become outdated, and there are better
ways of setting a better example. Writers are no longer protecting kids from
words they don’t already know: just visit any junior high school or middle
school playground.
Swearing can appear in narrative as well as dialog. It can
be used in an indirect quote, such as, “Bob had been heard to refer to Ted as a
fucking idiot.” This reveals something about Bob, Ted, and their relationship.
Particularly in non-fiction, the attitude being expressed can
be the author’s rather than a character’s, when an author is trying to make a
piece “edgy,” for example, or appealing to a certain audience: young and macho,
say, or angry or rebellious. As in dialog, though, when swearing for attitude
is used too much, it becomes annoying and hurts the author’s credibility. Once
the attitude is established, there’s little need for the swearing to continue.
And of course, it can also be used in direct quotes from
someone being interviewed or profiled.
A Caution for Reviewers
When you’re reviewing a work, and the author or her
characters are using language you don’t—and maybe don’t approve of—it can be
hard to evaluate the work objectively. Swearing, as an emotional action,
naturally draws an emotional reaction too. If that happens to you, try to take
a step back from the piece and remind yourself what you’re trying to do: to
determine if the piece “works” for its intended audience. Just as a writer
needs to “put on the clothes” of his characters, you may need to exchange your
usual “wardrobe” for that of the piece’s target audience.
Questions for You
So as a reviewer, how do you determine whether the
swearing—or the lack of it—in a work is necessary, appropriate, and effective?
Here are some tests you can use.
Is the language the character is using
appropriate to his or her personality, culture, era, and situation? If not,
what doesn’t fit? What can the author do to fix that?
Does it:
Add relevant information about the speaker or
another character that can’t or shouldn’t be presented some other way?
Reveal something new and unexpected about the
character?
Demonstrate a character’s extreme emotion or
physical pain?
Help the speaker express irony or sarcasm?
Illustrate or create an attitude, in the
character or the piece?
If the answer to any of these questions is no, and that
seems to have been the author’s intent, what can she do to fix it?
Does the language call inappropriate attention
to itself through overuse, underuse (does the author seem afraid to use it), or
artificiality (that is, made-up words)? If so, what needs to change?
For better or worse, obscenities, vulgarities, and swearing
in general are parts of the language of every culture. As a result, they have a
legitimate place in literature. Proper, purposeful use can, as with any other form
of speech, add to a work’s effectiveness and power—or detract from it.
When you’re
reviewing a piece, how do you evaluate the author’s use of swearing? If you’ve
got some suggestions, don’t keep them a damn secret! Share them in the comments
box below.
[1] Doctors have shown
swearing really does help ease pain!
Authors can and do go wrong with their word choices, or use words
the wrong way. This isn’t just a case of not understanding Mark Twain’s definition
of the difference between the right word and the almost-right word: the
lightning versus the lightning bug. It is that, but it’s much more.
Photo by ningmilo via FreeDigitalPhotos.net
There are at least half a dozen ways an author can mess
things up for herself and her readers when it comes to word choice. They are:
using words that are wrong for
The story, usually in narrative;
The character, usually in dialogue; or
The reader, in either one.
Authors can also simply use the wrong word when they don’t
know the difference between two or more words or what a word actually means.
And then there’s the trap of trying to be too clever. We’ll save obscenities
and vulgarities for next time but let’s take a look at the rest in more detail.
Wrong for the Narrative
Narrative words that are wrong for the story are ones that
don’t match what the story is meant to be. For example, the sometimes-flowery, sophisticated,
or psychologically dense language of “literary” fiction would be out of place
in a western, say, or a thriller. Conversely, the taut, gritty language of that
thriller would be jarring—in the wrong way—in a story examining the ins and
outs of a couple’s troubled relationship.
That’s not to say, of course, that there couldn’t be a
couple with a troubled relationship in a western or thriller, but the way that
relationship would be depicted—the words the author would use—would be very
different.
Writing above or below the level of the story, that is,
using words that don’t match the target audience and the personalities of the
characters makes the reader aware of the writing. Once that happens, that
magical bubble we call a story pops and it’s hard to surround the reader with a
new one.
Wrong for the Dialogue
Words in dialogue that are wrong for the characters can have
these same problems, plus a few more. For starters, we expect a longshoreman’s
conversations to be very different from those of a college professor: brief,
basic, and profanity-laced on the one hand, elongated, erudite, and perhaps
elliptical on the other. What they talk about will be different, too.
When the content and style of a character’s speech don’t
match what the reader expects, there’d better be a good reason for it. Maybe
the professor used to be a longshoreman and in the scene in question he’s
visiting his former buds at a bar near the docks. It would make sense if he
used rough language there. If, however, he talks like a longshoreman while
teaching electrical engineering, that’s a problem.
Another problem in dialogue is when a character reveals
knowledge she has no reason to have. To take an extreme example, the reader’s
going to be surprised if a manicurist at a nail salon in rural South Dakota uses
the language of the branch of physics called string theory, say, and uses it
correctly, while talking with her customers. If the reason why she understands things
like M-theory and branes hasn’t been established, it better be, and quickly, or
it needs to be replaced with something more appropriate.
A third problem in dialogue comes up when a character
expresses attitudes or beliefs that are contrary to what the reader knows, or
thinks he knows, about that character. The Bubba who uses the language of the
LGBTQ community—without irony or disrespect—or the shoe salesman who speaks
like an investment banker is, in the immortal words of Ricky Ricardo, going to
have “some ‘splainin’ to do.”
Wrong for the Audience
Words that are wrong for the reader include technical
jargon, slang, local idiom, dialect, or foreign or obscure words, especially
when the words’ meanings aren’t made clear through the dialogue, narrative, or
context. It’s okay to withhold information from the reader to build suspense or
tension, but not to confuse or distract the reader. When that happens, the words
throw the reader out of the story, whether it’s because he puts it down to go
find a dictionary, or he hesitates, trying to puzzle the meaning out, and then
struggles on (or worse, stops reading).
A former member of my writers’ group loved to show off his extensive
vocabulary by using unusual words. For example, he used “mephitic” to describe
the smell of a men’s room in his autobiography about his time as an enlisted
soldier. Not only is mephitic an uncommon word, it didn’t fit the story or his
primary target audience. (It, and other words like it, did emphasize how out of
place he was in that world, but that was already clear from the story itself.)
Misunderstood Words
Homonyms and homophones are the landmines of the English
language. Homonyms are words that share the same spelling but have different
meanings, such as quail and bear. Both can refer to animals, but quail also
means to cower in fear, and it’s a curdling agent too! Bear also means to
carry, to endure, or to uncover or be uncovered! YourDictionary.com has a short
list of homonyms, but there are many others.
Homophones are words that sound alike when spoken but are
spelled differently and have different meanings. Some of the best known are to,
too, and two; their, they’re, and there; and affect and effect. 7ESL.com has an illustrated list of over 300
homonyms and homophones.
People who pun use homonyms and homophones all the time.
It’s how we role—I mean, roll.
Humor writers use words called malapropisms intentionally
because the word substitutions can be hilarious: “he’s the suppository of all
knowledge around here” (suppository, not repository). Unfortunately,
these substitutions can show up in new writers’ work unintentionally if they
have mis-heard or misunderstood a word in the past.
Trying Too Hard
My earlier example of my friend
using mephitic instead of sulfurous is an example of trying too hard. Other
times it happens when a writer gets bored (with using “said” over and over, for
example) or wants to stand out somehow. One of the most infamous—and
giggle-inducing—examples is using “ejaculated” instead of “exclaimed.” Yes,
technically, ejaculated could be used to describe words bursting forth
from a character, but we all know the word isn’t typically used to refer to
words these days.
On the Other Hand…
Of course, there will always be cases where any of these
kinds of supposedly wrong words will be both necessary and appropriate. The
author may be setting up a contrast between the scene and the story’s tone or
between a character’s past and her present. She may be using dialect, jargon,
or incorrect or inappropriate words to establish something about a character.
As a reviewer, you need to be aware of the possibility the writer is doing
something “wrong” to achieve a certain effect.
Questions for You
What questions could you ask when you review a work for
these kinds of problems? Try these.
Did the author use language that felt out of
place—too sophisticated, too simple, or otherwise inappropriate—for the story?
Did I have to stop reading to figure out what a
word meant?
Did the author apparently not understand what a
word meant?
Did it feel like the author was trying to show
off by using fancy words?
Did a character use words that didn’t fit with
what I know about him or her?
Is the author consistently but unintentionally
making homonym or homophone substitutions?
On the other hand, was there a purpose to what
the author was doing with her word choices? If so, how effective was it? If
not, why was it not effective?
If the answer to any of these questions but the last set is
yes, mark where the problem occurs and discuss alternatives with the author.
What do you look for when it comes to inappropriate words in
a story? Please be careful to avoid spreading contusions 😉 when you provide your
answers in the comments box below.
In the movie My
Fair Lady, Eliza Doolittle, the Cockney flower girl turned high-society
woman of charm and mystery, sings to her would-be boyfriend, “Words, words,
words, I’m so sick of words….”
For some writers, that’s not a problem. In fact,
they’re too in love with words, and think the more of them there are on the
page or screen, the better. Then there are the others who, Eliza-like, want no
more of them. Or at least darn few of them.
The days of padding a piece with any and every
extraneous available word, á la Henry
James, are over. (Well, for new or getting-established writers, they’re over.
For über-successful authors like
Stephen King, Tom Clancy, or George R. R. Martin, padding may not be
intentional, but it’s not edited out, either.)
At the other end of the spectrum, writers who take
tight, Ernest Hemingway-like writing to the Clint Eastwood man-with-no-name
extreme may not see print, either, at least not with a traditional publisher.
Style Versus Substance
Why? Because both writing styles hide meaning. Wordy
writing buries it under a pile of needless verbiage, while too-spare writing fails
to provide enough information for the meaning to come through.
Both styles can also reveal a lack of confidence on
the writer’s part.
Wordy writing may
reveal the author’s fear that the reader won’t understand what he’s written.
In cryptic
writing, the author:
Doesn’t know how
to convey onto the page what she’s seeing in her mind’s eye, or
Assumes the
reader knows everything she knows, or
Is perhaps afraid
to say too much.
Different genres of fiction and different non-fiction
markets have different preferred styles. “Literary” and mainstream fiction tend
to be wordier than some other forms because they value and expect more depth of
description, greater use of simile and metaphor for comparison, more
exploration of psychological and emotional states, and so on. Thrillers,
westerns, and some science fiction, on the other hand, get right to the point
and the action.
The same is true in non-fiction: a magazine like Atlantic Monthly expects a different—wordier—style than, say, Outside.
So, before making a judgment on whether a piece is too
wordy or too cryptic, it helps to know its genre or target market.
What to Look For
With that in mind, you can start testing for faults. Too
spare writing is easier to deal with, if not necessarily easier to detect. If a
piece is too spare, you’ll find yourself wanting to know more. It may be drawing
your curiosity but it also has holes. They might be details about a character,
setting, or situation that you feel you need to know right now but don’t, or
the story might fly by, flashing from event to event without explanation or
development. In cases like these, flag the places where the problems happen and
identify what you need to know, how the plot, characterization, or setting can
be developed more, or the pace slowed.
Overly wordy writing can take many forms. Here are
some examples.
Using phrases
like “in order to” or “in expectation of” rather than the shorter and cleaner
“to” or “expecting”;
Using the passive
voice;
Piling on excess descriptive phrases,
adjectives, or adverbs;
Data-dumping:
pouring in more information than the reader needs at that moment in the piece;
or
Trying to be
“literary” by writing long, winding, complicated sentences.
Like the wordy writer, this list could go on and on.
The best ways to tell when writing is too wordy are:
You feel like
you’re wading through the piece, rather than flowing through it;
You become
conscious of the fact that you’re reading rather than being engaged in the
story;
You find yourself
losing interest, your mind wandering off to ponder what you’re going to have
for dinner, whether your daughter’s newest boyfriend can be trusted farther
than you can throw him, etc.
Of course, there can be other reasons for being
distracted, but in cases like these, when you drag your concentration back to
the work, you’ll know you need to get out your verbosity meter and take a
reading (pun intended).
Questions for You
Here are some questions you can ask yourself as you
review a writer’s work.
Do I find myself
struggling to understand what the author is trying to say, or picture what he’s
trying to describe?
Is that because
he’s buried the meaning or description in too many words? Is he trying to be
“literary” in a piece that is not meant for that market? If so, show him how he
can clean out the excess.
Is it because
there’s too little information or description? If so, what needs to be added,
and where?
Is she using
empty words that don’t add anything meaningful to the piece?
Is he using the
passive voice? Show him how the active voice saves words and is more engaging.
Is she providing
explanations you think readers don’t need?
Did she provide
that information before? If so, all you may need to do is remind her of that
and encourage her to believe that her readers really will remember it from last
time.
Is there so much
information that it bogs the story down? If so, show her how she can trim out
the material that is not contributing. Maybe it can be used elsewhere. Or maybe
it is not needed at all.
Conversely, does
it seem that he’s left important information out because he assumed the reader
knows things they don’t? Show him why that information needs to be added, and
where a good place to do it would be.
Speaking of getting wordy, it’s time to cut this piece
off. What do you look for to identify when writing is too wordy or too cryptic?
And what do you do to help such writing get better? Feel free to put your brief—but
not too brief—suggestions in the comments box below.
In addition to taking care to develop your own skills as a critiquer, some of which I discussed in Part 1A, there’s one other person you need to always be mindful of: the person whose work you’re reviewing.
Think about how you react when your work is being critiqued. In 2012, Becky Levine wrote a blog post called Critique Comments: Remembering to Give Them Time. She advised letting a critique you receive sit and percolate, or ferment, or something (my words, her concept) before responding to it. Of course, there’s going to be the natural, defensive first response, even if the comments aren’t negative. Any suggestion to do things a different way is going to get that. That’s a reaction that needs to be put aside, taken off the hot stove and allowed to cool, as it were. It might be wrong.
Or it might not.
But in the heat of that first reactive moment, it can be hard to tell.
I’ve been there. One of my writers’ group members didn’t read the kind of fiction I write (science fiction), so some of the techniques of the genre confused her. Sometimes she’d forget something that was explained a half page or two pages before. Sometimes context eluded her. So she’d comment on whatever confused her, and my first reaction was often frustration. But then… sometimes… I’d take another look and… well, yeah, I could have written that better.
That’s a Person Over There!
That’s a good lesson. And it leads to this reminder: when you’re a critiquer, it’s important to remember that the work you’re reading was written by a human being. If you’re going to deliver that critique in person, you’ll see their initial reaction up close and personal. If you’re delivering it online, you may not, in which case it’s even more important to remember the humanity of the person on the receiving side of that critique. The anonymity, or at least physical separation, of the internet is no excuse for being a jerk.
Or worse.
Think about how you’d feel—or have felt—when you got a critique like that.
I’ve read many first drafts of new writers’ first novels. They’re rough. Of course they are, they’re first drafts! The fact that they can often be rough for hundreds of pages is still no excuse for me to be hard on the author. It’s a first draft. If the writer’s gotten that far into the piece, they’ve got the talent to string together a complete novel. And for the first time in their life, they’re trying to do it. Yes, there will be a lot of work yet to do: drafts 2 and 3 and 4 and…. This is just the first one.
But if I do my job wrong, if I’m too hard on that new author, maybe there won’t be a draft 2 and a draft 3 and so on until it’s done. Maybe they’ll decide it isn’t worth the continued abuse (their thought, not my intent!) to go on to draft 2 and draft 3 and….
Which would be an absolute shame.
Dif’rent Strokes for Dif’rent Folks
There’s one other thing to think about. Different people learn and absorb information differently. Some do best reading new information. Others need to see it demonstrated. Still others need to hear it. And yet others learn best by doing a particular task. In-person and online critique group reviews tend to be written, with an oral summary at the group meeting. Critiques provided via a critique web site are almost always exclusively written.
But what happens if that doesn’t connect with the way the author learns best? I currently have a critique group member who does a lot better if he hears the individual comments. Written comments and guides tend to go in one eye and out the other with him. One-on-one, step-by-step reviews with him doing the editing in real time takes time, but if the time spent turns out to make a big different in the areas he’s having trouble with, it’ll be time well spent.
Our Responsibility
As critiquers, we have to remember that we hold something very fragile in our hands—a new (or not so new) writer’s ego, their hopes, their dreams—and if we’re needlessly harsh, if we only criticize without offering suggestions for ways to get better results, we not only do no good, we may do harm.
That isn’t to say we can’t or shouldn’t point out what isn’t working, or isn’t working as well as it could. It’s not to say we need to sugarcoat everything, or be so namby-pamby or vague that what we say is as good as useless.
Writers do need to develop a thick skin. Once their work is published, they’re going to get feedback, and those one- and two-star reviews can sting. The internet’s trolls can be especially cruel.
But that does not mean we critiquers should be.
It does mean that we should always remember what it’s like to be on the receiving end of a critique and do our work accordingly.
What are your thoughts about how to put yourself in the place of that other author when you’re critiquing their work? How do you approach presenting your critique, especially when the author has a lot of work to do? Please share your thoughts, suggestions, and ideas in the comments box below.
Image courtesy of Graur Codrin / FreeDigitalPhotos.net
Writers’
tics—those sneaky, dastardly things that slip into our writing when we’re not
looking and make it go CLANK!
They’re insidious and terribly hard to recognize: our eyes glide right over
them when we’re editing.
And
it doesn’t matter how experienced we are, we’re still vulnerable to them.
What
are they? Here’s a nowhere-near-complete list:
Incessantly using unnecessarily intrusive adverbs excessively.
Clichés we’ve read a million times before.
The words or phrases we really like to use over and over because they really do a really great job of really capturing what we’re really trying to say.
Those, like, popular, y’know, empty words or phrases that are nothing but noise. I know: seriously?
Repeated word patterns:
Short, choppy sentences. Strings of them. One after the other. Like that. And this.
Whenever you’re writing, beginning sentences with independent or dependent clauses.
Making repeated parenthetical comments, perhaps set off between commas, or other ways (within parentheses)—or between dashes—to call attention to them.
Putting words or phrases in quotation marks to “set them off” from the others, so readers know they’re “special.”
Using italics or ALL CAPITALS when a character’s being very emotional. Even when they’re NOT.
Using exclamation points!! A lot!!!
Having one or more characters use the same gesture, facial expression, or other behavior over and over.
The
list goes on. And on.
The
good news is that this is a case where being a critiquer can benefit you as
well as the author you’re reading. When you’ve learned to spot these problems
in other people’s writing, you’ll catch more of them in your own work.
Great!
But what are you trying to do?
Finding Writer’s Tics
The
good news is that finding writer’s tics uses a kind of working memory. Your
subconscious keeps track of things in a story or article, counting each time they
show up, and when it detects something, it whispers, “Hey, that’s the third
time she’s used ‘really’ as an adjective in the last four paragraphs. Looks
like there’s a pattern setting up.” Once you’ve developed this turn of mind to
catch these problems, they’ll start jumping out at you.
It’s
like what happens after you’ve gotten a new car. Suddenly, you start seeing the
same make and model on the street. You’ve become attuned to that thing—car or
phrase—and now they seem to be everywhere. It’s not that they weren’t there
before, you’re just more conscious of them now.
So
how do you learn how to do this?
The
good news is that there are at least a couple ways. First, if you know someone—a
member of your writers’ group or a trusted reader—who already has the skill, watch
them in action. Listen closely when they’re giving critique to another member
of your group and then go back through that same piece, looking for what they
found.
If
they reviewed some of your own work and were kind enough to mark those tics for
you, go looking for the same problems in your other work.
Or,
take a piece of writing that you’ve been told has some kind of writer’s tic in
it, but not what the specific problem is, and try to find it yourself.
Like
this one. I’ve planted a problem in it: a phrase that I’ve used repeatedly and
in a very specific way. Can you find it?
The
good news is that if you can find it, you won’t have to look in this footnote[1] to find out what
it is. (By the way, did you also notice that every bullet except the last one
at the start of this article illustrated the problem it was describing?)
Like
all the other problems and techniques in this series, detecting writers’ tics
is about being aware of more than just the chain of words that passes before
your eyes. It’s about seeing the work in larger parts, as the sum of those
parts, and as something more than the sum. It’s about reading like a writer,
not merely like a reader.
Once
you’ve developed this skill, not only will you be able to help the writers
you’re reviewing, you’ll be able to shock and dismay yourself when you discover
how much you make these mistakes, too! But that’s OK, because after you get
over the shock and fix the problems, your work will be better, and that’s what
we’re all striving for.
Questions for You
Let’s
go back through that list of potential tics and create some questions you can
ask yourself as you review a work.
Does he
use adverbs excessively?
Does she
use clichéd descriptions?
Are
there certain words or phrases that keep showing up in his work?
Does she
use empty words that add nothing to the text? (Note that these can be acceptable
in dialogue, at least for a while, to help demonstrate a character’s
personality.)
Does he
repeat sentence structures, like short or long sentences, or repeatedly
beginning sentences with dependent or independent clauses?
Does she
overuse commas, parentheses, em-dashes, italics, all capitals, or exclamation
points?
Do his
characters have only a limited repertoire of gestures, facial expressions,
etc.?
If
the author does any of these things, or you notice any other kind of
unintentional repetition, be sure to point it out to them and suggest what they
can do to fix it.
What
other kinds of writer’s tics have you noticed in work you’ve reviewed? If you
know any other techniques that writers and critiquers can use, please include
them in the comments box below.
[1] It’s starting paragraphs
with the phrase “The good news is that…”
Contains information about the traffic source or campaign that directed user to the website. The cookie is set when the GA.js javascript is loaded and updated when data is sent to the Google Anaytics server
6 months after last activity
__utmv
Contains custom information set by the web developer via the _setCustomVar method in Google Analytics. This cookie is updated every time new data is sent to the Google Analytics server.
2 years after last activity
__utmx
Used to determine whether a user is included in an A / B or Multivariate test.
18 months
_ga
ID used to identify users
2 years
_gali
Used by Google Analytics to determine which links on a page are being clicked
30 seconds
_ga_
ID used to identify users
2 years
_gid
ID used to identify users for 24 hours after last activity
24 hours
_gat
Used to monitor number of Google Analytics server requests when using Google Tag Manager
1 minute
_gac_
Contains information related to marketing campaigns of the user. These are shared with Google AdWords / Google Ads when the Google Ads and Google Analytics accounts are linked together.
90 days
__utma
ID used to identify users and sessions
2 years after last activity
__utmt
Used to monitor number of Google Analytics server requests
10 minutes
__utmb
Used to distinguish new sessions and visits. This cookie is set when the GA.js javascript library is loaded and there is no existing __utmb cookie. The cookie is updated every time data is sent to the Google Analytics server.
30 minutes after last activity
__utmc
Used only with old Urchin versions of Google Analytics and not with GA.js. Was used to distinguish between new sessions and visits at the end of a session.
End of session (browser)
Marketing cookies are used to follow visitors to websites. The intention is to show ads that are relevant and engaging to the individual user.
X Pixel enables businesses to track user interactions and optimize ad performance on the X platform effectively.
This cookie is set by X to identify and track the website visitor. Registers if a users is signed in the X platform and collects information about ad preferences.
2 years
personalization_id
Unique value with which users can be identified by X. Collected information is used to be personalize X services, including X trends, stories, ads and suggestions.
2 years
external_referer
Our Website uses X buttons to allow our visitors to follow our promotional X feeds, and sometimes embed feeds on our Website.